help please

| October 30, 2015

A temperature sensor is exposed to a sudden change of 20oC to 80oC. The sensor outputs 0.02 volts for every oC of temperature and has a 2.3 second time constant.
What is the sensor output voltage at 1.5 seconds?
At what time, t, does the sensor output become 1.0 volt?
A sensor, R, that changes resistance is used in a bridge circuit as shown below.
What sensor resistance, R, will null the bridge?
What is the off-null voltage if R changes by 0.5 Ω?
A measurement system has noise above 20 kHz and the data signal frequency is between 100 and 500 Hz. Design an RC filter that reduces the noise by 95%, i.e., only 5% is left. Show the schematic and the component values.
Given a Type J TC with a 25oC reference.
What is the temperature if the TC voltage is 22.87 mV?
What voltage would result from a temperature of 225oC?
A 10-bit ADC has a 5.00-volt reference.
What binary output is produced by an input of 3.04 volts?
Suppose the output is found to be 1F4h. What is the possible input voltage?
A 12 bit bipolar DAC has a 10-volt reference.
If the hex input is 5D7h what is the DAC output voltage?
What input is required to get a zero volt output?

Get a 5 % discount on an order above $ 150
Use the following coupon code :
Engineering Ethics - Discussion, Paper, and Some Questions
Instrumentation and process control Midterm

Category: Homework Help

Our Services:
Order a customized paper today!
Open chat
Hello, we are here to help with your assignments